EX9063AB-MTCP

Beschreibung

EX-9063A-MTCP provides 7 isolated digital input channels and 3 relay output channels. All input channels are single ended with common source/ground and support input latch function for important signal handling. Meanwhile, these DI channels allow to be used as 500Hz counter. All relay output channels are differential with individually common . the EX-9063A-MTCP Digital Output channels also support Auto-Off Time of digital output and DIO Synchronization function.

• Digital input : Isolated single ended with common source /ground.

1. Channel : 7 channels (DI0~DI6).
2. Input Level : Logic level status can be inversed via ASCII/Modbus command.
3. Dry Contact : Single ended with common ground
   • Logic level 1(active) : Close to GND
   • Logic level 0 (inactive): Open
4. Wet Contact : To use Wet Contact , the DI.GND pin must be opened.
   • Logic level 1 (active), +10V to +50VDC max
   • Logic level 0 (inactive), +2VDC max
5. Input Impedance : 10K ohm(Wet Contact)
6. Counter mode : Supports up to 500Hz counter(by software,32-bit + 1-bit overflow)
7. Optical Isolation Voltage : 3750Vrms

• Relay Output : RL1, RL2, RL3 (DO0~DO2)

1. Output channels : 3 relay output channels (Form A).
2. Surge strength : 4000V
3. Relay contact rating : 5A/250Vac, 5A/30Vdc
4. Operate Time : 6mS max.
5. Release Time : 3mS max.
6. Min Life : 105 ops.
7. Pulse Output : Each channel supports 500Hz pulse output

• Display : 7 digital input & 3 Relay output status LED
• Power requirements : Unregulated, +10V ~ +30 VDC
• Power Consumption : 2.4 W (Typical)