EX9063AB-MTCP - 7-channel Digital Input and 3 RELAY output Module
DI*7(Dry/Wet Contact; Isolation) & 3 Relay(5A@250VAC; 5A@30VDC)Output(Form A)& DIO Sync (Mirror Local DI to DO) & Auto-Off Time of digital output
Description
EX-9063A-MTCP provides 7 isolated digital input channels and 3 relay output channels. All input channels are single ended with common source/ground and support input latch function for important signal handling. Meanwhile, these DI channels allow to be used as 500Hz counter. All relay output channels are differential with individually common . the EX-9063A-MTCP Digital Output channels also support Auto-Off Time of digital output and DIO Synchronization function.
- Digital input : Isolated single ended with common source /ground.
- Channel : 7 channels (DI0~DI6).
- Input Level : Logic level status can be inversed via ASCII/Modbus command.
- Dry Contact : Single ended with common ground
- Logic level 1(active) : Close to GND
- Logic level 0 (inactive): Open
- Wet Contact : To use Wet Contact , the DI.GND pin must be opened.
- Logic level 1 (active), +10V to +50VDC max
- Logic level 0 (inactive), +2VDC max
- Input Impedance : 10K ohm(Wet Contact)
- Counter mode : Supports up to 500Hz counter(by software,32-bit + 1-bit overflow)
- Optical Isolation Voltage : 3750Vrms
- Relay Output : RL1, RL2, RL3 (DO0~DO2)
- Output channels : 3 relay output channels (Form A).
- Surge strength : 4000V
- Relay contact rating : 5A/250Vac, 5A/30Vdc
- Operate Time : 6mS max.
- Release Time : 3mS max.
- Min Life : 105 ops.
- Pulse Output : Each channel supports 500Hz pulse output
- Display : 7 digital input & 3 Relay output status LED
- Power requirements : Unregulated, +10V ~ +30 VDC
- Power Consumption : 2.4 W (Typical)
Features
Pictures