EX9486-L-DIO

Description

EX9486-L-DIO which is ARM9 Embedded digital signal controller on ethernet/RS485 network of ARM9 , to proceed and control digital input and digital output，used in switches control or monitoring；with TCP/IP standard interface and Web Server，it can be developed the remote function of monitoring and control from far end，and also provided RS-232 and RS-485 serial communication interface，it can be connected with different kind of devices or instrument cluster.
EX9486-L-DIO Easy Development for the Application System
EX9486-L-DIO use ATMEL AT9G20 400MHz ARM9 RISC processor, with 64MB SDRAM and 128 MB Flash to be the core of system, built in Embedded Linux OS kernel 2.6.x and File system, and provided abundant communication, control interface and corresponding drivers.
Under Linux or Windows operation systems, users via the built in C/C++ Compiler and the software developed tool of Lib can proceed the design of application software and obtained related technical support to complete the system programming and development.
TCP/IP Network Communication & Web Server
EX9486-L-DIO have one set of high speed Ethernet Interface and Web Server built in, user can easily develop a set of remote controller system through the web to proceed monitoring and control. USB Interface of EX9486-L-DIO can be connected the 802.11 Wi-Fi or 3G wireless interface to make the TCP/IP communication to completely.
High speed serial interface
EX9486-L-DIO has 3 RS232 and 1 RS485 COM port, the highest baud rate of each COM port goes to 921.6Kbps which to make users connecting any kind of devices, instrument cluster and machine for the monitoring control.
Fully Digital Signal Control Interface
EX9486-L-DIO with 3 kinds of Digital Signal Control interfaces of digital signal control. Isolate the signal of digital input control which may connect with different kind of switched, buttons and sensors to proceed real time monitoring; Relay output control which can normally for switches controller, even can directly to control or switching the devices or instrument cluster. GPIO can make users define for Input or Output control.
Industrial Rackmount/Wallmount design
The design of Rackmount and Wallmount that to meet the requirement of using and setting up on many harsh and environmental maintainess, Voltage input range 9~40V; standard Terminal Block & Connector for easily to make wiring and construction.
Digital Output :
Relay : N.O./ N.C./ COM
240VAC@5A / 24VDC@5A
Ddigital Input :
5~24VDC
Wet/ Dry (Selectable by jumper)
GPIO :
32 points Input/ Output Selectable.
3.3 VDC CMOS.
2.54mm 10x2 pin grid.