EX9033P - RS485 3 RTD input with individual channel configuration
EX9033P Analog In 16 bit RS485 Out I/O device. 3 RTD In channels with individual config. e.g. PT100, PT1000. Break-line detection and wide temperature range
Description
The EX9033P Analog In 16 bit module for RTD excels at use for temperature measurement with a resistance temperature detector. The Analog In 16 bit module has 10 Hz sampling rate as well as a built-in open-loop detection. Each channel of the Analog In RS485 module can be configured seperately and the module may be operated in a wide temperature range.
Features:
- 3 input channels
- support all popular resistive thermometer
- individual channel configuration
- break-line detection
- output as RS485-interface
- in- and output galvanically isolated
- manual configuration or with supplied software
- power supply 10 - 30VDC
Supported thermometers:
- Pt100 a=0.00385
- Pt100 a=0.003916
- Pt1000 a=0.00385
- Cu100 a=0.00421
- Cu100 a=0.00427
- Cu1000 a=0.00421
- Ni120
Features
Interface |
|
|---|---|
| Communication | RS485 |
| Speed | 300 - 115200 bps |
| Connector | Terminal Block |
| Protocol | ASCII |
Input / Output |
|
| Type | RTD |
| Channels input | 3 |
| Isolation | Yes |
Analog-In |
|
| Channels | 3 differential |
| Resolution | 16 bit |
| Total sample rate | 15.7 Hz |
| Accuracy | ± 0.1 % |
| Zero Drift | ± 0.5 µV/°C |
| Span Drift | ± 20 ppm/°C |
| Sensor type | PT100, PT1000, CU100, CU1000, NI120 |
| Sensor input | 3 x 2/3/4 wire |
Features |
|
| Isolation voltage | 3000 V |
| Extras | Individual channel configuration, Break line detection |
System |
|
| Power max. | 1 W |
| Power input | 10~30V DC |
Enclosure |
|
| Mounting | Din Rail Mounting |
| Dimension | 100 x 70 x 25mm |
| Weight | 110g |
Environment |
|
| Operating temperature | -25~75°C |
| Storage temperature | -30~75°C |
| Certification | CE / FCC / WEEE / RoHS |
Other |
|
| included in delivery | Din Rail Mounting Kit |
Pictures